High Carbon Wire Straight Line Wire Drawing Machine
Straight Line Wire Drawing Machine Work Process:
Steel in coil →Pull up wire rack→Derusting machine→bepowder→Straight Line Wire Drawing Machine→Automatic take-up
Straight Line Wire Drawing Machine Introduction:
Straight wire drawing machine is one of the common metal wire processing equipment. Straight wire drawing machine can stretch high, medium and low carbon steel wire, stainless steel wire, copper wire, alloy copper wire, aluminum alloy wire, etc. Line processing. Accurate meter counting with error of 0.1%; fixed-length automatic deceleration and parking; disconnection detection and automatic parking; forward and reverse jog and left-right linkage of any reel; various fault information and processing information display; various motion information monitoring. And support any mold matching process, after the mold is worn, it is automatically compensated by tuning, and it is not easy to break the wire. And there is a jumper device that can cut off the reel and pull it arbitrarily to adapt to different processes. According to user needs, remote control and remote diagnosis can be implemented based on industrial ethernet.
Straight Line Wire Drawing Machine Parameters and characteristics:
| Times of drawing | Drum dia | Max inlet dia | Min inlet dia | Speed | Single power | Input strength |
| 2-11 | 300mm | 2.8mm | 0.5mm | 25m/s | 7.5-18.5kw | <=1250MPA |
| 2-11 | 350mm | 3.5mm | 0.6mm | 20m/s | 11-22kw |
| 2-11 | 400mm | 4.2mm | 0.75mm | 20m/s | 11-30kw |
| 2-12 | 450mm | 5mm | 1mm | 16m/s | 15-37kw |
| 2-12 | 500mm | 5.5mm | 1.2mm | 15m/s | 22-45kw |
| 2-12 | 560mm | 6.5mm | 1.4mm | 15m/s | 22-55kw |
| 2-12 | 600mm | 8mm | 1.6mm | 12m/s | 30-75kw |
| 2-9 | 700mm | 10mm | 2.2mm | 12m/s | 45-90kw |
| 2-9 | 800mm | 12.7mm | 2.6mm | 8m/s | 55-110kw |
Straight Line Wire Drawing Machine Advantage:
1,The reel adopts narrow slot water cooling, and the drawing die adopts direct water cooling; the cooling effect is good;
2,Adopt a first-class strong narrow V-belt and a first-level planar secondary envelope worm gear pair transmission, with high transmission efficiency and low noise;
3,Adopt fully enclosed protection system, good safety;
4,Air tension tuning is adopted for smooth drawing;
5,Using AC frequency conversion control technology (or DC programmable control system), screen display, high degree of automation, easy operation, high quality of drawn products.
6,Cast steel sprayed with tungsten carbide (or surfacing wear-resistant alloy), hardness HRC>60, good wear resistance. The cooling method uses narrow slot cooling and annular air cooling.
7,The taper design is reasonable: to ensure that the line does not collapse and the line is not disordered.
Product Tags:
|
|
11 Blocks Straight Line 1200kgs / Hour Wire Drawing Machine Images
|
